How to Operate iStick Pico Mega
How to Use
Power on/off: Screw off the battery cap, put one high-rate 26650 cell or put one high-rate 18650 cell with the battery sleeve into iStick Pico Mega (positive pole down and negative pole up) and finally screw on the battery cap. The device can be powered on/off by pressing the fire button 5 times in quick succession.
Vaping: Long press the fire button to take a puff.
Stealth on/off: Press the fire button and down button simultaneously when the device is powered on to switch between Stealth On and Stealth Off mode. In Stealth On mode, you can vape with the OLED screen off and you can press the fire button one time to see current setting.
Adjustment buttons lock/unlock: Keep pressing up button and down button simultaneously for two seconds when the device is powered on, then the up and down buttons will be locked and the screen will display “Lock”. In the same way, the up and down buttons can be unlocked and the screen will display “Unlock”. Through this operation, you can protect the buttons from unintentional presses and prolong their lifespan.
Switch vaping modes: When the device is powered on, press the fire button 3 times in quick succession, the device will display current vaping mode. Press the up or down button to switch among VW, Bypass, TC-Ni, TC-Ti, TC-SS, TCR-M1, TCR-M2, TCR-M3 modes and then press the fire button one time or stay in the interface for about 10 seconds to confirm the vaping mode you chose.
How to Charge
The battery power indicator on the screen of Eleaf iStick Pico Mega Melo III Kit will keep flashing when the remaining power of the cell is less than 10%.
It is recommended to charge the 26650 or 18650 cell with an external battery charger as it will take less time to give it a full charge.
Power on/off: Screw off the battery cap, put one high-rate 26650 cell or put one high-rate 18650 cell with the battery sleeve into iStick Pico Mega (positive pole down and negative pole up) and finally screw on the battery cap. The device can be powered on/off by pressing the fire button 5 times in quick succession.
Vaping: Long press the fire button to take a puff.
Stealth on/off: Press the fire button and down button simultaneously when the device is powered on to switch between Stealth On and Stealth Off mode. In Stealth On mode, you can vape with the OLED screen off and you can press the fire button one time to see current setting.
Adjustment buttons lock/unlock: Keep pressing up button and down button simultaneously for two seconds when the device is powered on, then the up and down buttons will be locked and the screen will display “Lock”. In the same way, the up and down buttons can be unlocked and the screen will display “Unlock”. Through this operation, you can protect the buttons from unintentional presses and prolong their lifespan.
Switch vaping modes: When the device is powered on, press the fire button 3 times in quick succession, the device will display current vaping mode. Press the up or down button to switch among VW, Bypass, TC-Ni, TC-Ti, TC-SS, TCR-M1, TCR-M2, TCR-M3 modes and then press the fire button one time or stay in the interface for about 10 seconds to confirm the vaping mode you chose.
How to Charge
The battery power indicator on the screen of Eleaf iStick Pico Mega Melo III Kit will keep flashing when the remaining power of the cell is less than 10%.
It is recommended to charge the 26650 or 18650 cell with an external battery charger as it will take less time to give it a full charge.
No comments